TM 1-5855-265-20
3-34
3-10. RIM CLENCHING CLAMP REPLACEMENT (cont)
r. Position locking ring (4) and catch (7)
between LATCH location lines (17) on
PNVS shroud assembly.
s. Push latch handle (5) to secure clamp (8).
t. Push locking ring (4) to lock latch handle
(5).
5. Have rim clenching clamp adjustment
inspected. Ensure visual inspection is
performed 360° around clenching clamp.
If adjustment inspection fails, repeat step 4.
6. Install safety wire (3) to secure locking ring (4)
to latch handle (5).
7. Have rim clenching clamp installation
inspected. Ensure visual inspection is
performed 360° around clenching clamp.
If it fails inspection, repeat step 4.
8. Perform followup.
END OF TASK
REMOVAL - TYPE II
CAUTION
PNVS window cover assembly must be
installed before starting this task. Optical
coating on window could be damaged if PNVS
window cover assembly is not installed.
1. Move PNVS turret assembly (1) 30° out of stow
(para 3-3). At this point, PNVS window cover
assembly (2) should be 90° to the left of
forward position.
2. Remove safety wire (3) securing latch handle
(5).
3. Remove rim clenching clamp (8).
a. Push safety catch tab (18) and release
latch handle (5).
LATCH
PUSH
PUSH
310-028
17
4
5
7
3
8
17
1
2
3
18
5
8
310-055A
