TM 1-5855-265-20
3-32
3-10. RIM CLENCHING CLAMP REPLACEMENT (cont)
INSTALLATION AND ADJUSTMENT - TYPE I
4. Install and adjust rim clenching clamp (8).
a. Hold rim clenching clamp (8) at an angle
above PNVS turret assembly (1). Make
sure latch handle (5) is on PNVS window
cover assembly (2) side of PNVS turret
assembly.
b. Lower rim clenching clamp (8) along a
sloped path past window cover assembly
(2).
c. Spread rim clenching clamp (8) wide
enough to clear balance weight (11).
d. Lower rim clenching clamp (8) past balance
weight (11).
e. Engage rim clenching clamp (8) over mated
rims (9 and 10) and hook T-bolt (6) onto
catch (7).
f. Loosen jam nut (13) behind latch handle
(5).
g. If you cannot hook T-bolt (6), make it longer
by unscrewing it out of latch handle (5).
Then hook T-bolt onto catch (7).
CROSS SECTION
VIEW
9
8
10
11
1
5
8
2
13
5
7
6
HOOK
310-029
