TM 1-5855-265-20
3-30
3-10. RIM CLENCHING CLAMP REPLACEMENT
INITIAL SETUP
Tools
50-lb force gage, Chatillon Model DPP-50
Aircraft armament repairman tool set
Aircraft armament technical inspector tool set
Maintenance platform (optional)
Torque wrench, 10-50 in-lb
Materials (appendix D)
Tape, pressure sensitive (Item 32)
Wire, safety (Item 37)
Personnel Required
68X Aircraft Armament/Electrical Repairer
66J30 Aircraft Armament Technical Inspector
Equipment Conditions
Ref
Condition
Para 3-2
Premaintenance
procedures performed
Para 3-9
PNVS window cover
assembly installed
FOLLOWUP
Move PNVS turret assembly into stow (para
3-3)
TASK DESCRIPTION
One of two types of rim clenching clamp is used to clamp a PNVS shroud assembly to a PNVS turret
assembly. The main differences are in the latch and safety mechanism, and are illustrated below. The
procedures cover replacement (removal, installation, and adjustment) of each rim clenching clamp by
type. If rim clenching clamp or PNVS shroud assembly is removed and re-installed or replaced,
adjustment must be performed.
LOCKING RING FOR
SAFETY WIRE INSTALLATION
LATCH HANDLE
T-BOLTS HOOKS CATCH
OPPOSITE SIDE OF LATCH
HANDLE
CATCH
TYPE I
SAFETY CATCH
TAB FOR SAFETY
WIRE INSTALLATION
LATCH HANDLE
TYPE II
CATCH
T-BOLT HOOKS
CATCH ON LATCH
HANDLE SIDE
310-056
