TM 1-1520-218-10
3C-178
Table 3C-92. UHF MWOD List Selection and
Loading Procedure
NO.
DESCRIPTION/FUNCTION
1
Press COM function key to access
communication page.
2
Press CTRL line select key to access
V/UHF CTRL page.
3
Access the V/UHF HAVE QUICK
setup page via the V/UHF control
page.
4
Enter the MWOD date.
5
Access the V/UHF MWOD entry page
for the selected day and enter the
WOD elements if necessary. The
MWOD elements can be loaded from
the data cartridge also.
6
Element 20 must be between 200.0xx
and 299.9xx or 300.1xx and 399.9xx
(xx can be any two digits) for a WOD.
7
Load
the
MWOD
list
into
the
corresponding V/UHF radio.
8
Return to the V/UHF HAVE QUICK
setup page.
(j) Loading
Frequency
Management
Training Lists. An FMT list can be created manually
using the V/UHF FMT Load pages or loaded from the
data cartridge. Refer to Figure 3C-131 and Table
3C-93. To load each FMT element into the FMT list
manually, access the FMT Load pages as shown in
Figure 3C-131. Finally, to load the FMT list into the
V/UHF radio, press the ENTER line select key on any
of the V/UHF FMT Load pages. When an FMT list is
successfully loaded into the V/UHF radio, the radio will
acknowledge each FMT element load with a short
tone, ending with two headset beeps.
NOTE
FMT elements can be manually entered or
loaded from the data cartridge.
Figure 3C-131. V/UHF FMT List Selection and
Loading
Table 3C-93. V/UHF FMT List Selection and
Loading Procedure
NO.
DESCRIPTION/FUNCTION
1
Refer to Figure 3C-132 for details on how
to access the V/UHF 1 HAVE QUICK
setup page.
2
To access FMT load 1 page.
3
Element 20 must be set to 300.0xx (xx
can be any two digits) for an FMT list.
4
Scroll to the V/UHF FMT load pages 2
and 3.
5
Load the FMT list into the corresponding
V/UHF radio.
