TM 1-5855-265-20
3-68
3-13. PNVS ELECTRONIC CONTROL AMPLIFIER (PECA) REPLACEMENT (cont)
b. Move PECA (1) up behind horizontal
member (5) until top of PECA (1) is just
below top of mounting bracket (4).
c. Hold PECA (1) at a 15° angle; top toward
mounting bracket (4) and bottom away from
bracket.
d. Engage top of PECA (1) with top of
mounting bracket (4).
e. Push bottom of PECA (1) against mounting
bracket and engage two captive screws (3).
13. Torque captive screws (3) to 30 in-lb.
14. Have PECA installation inspected.
15. Perform followup.
END OF TASK
1
4
3
5
330-007