TM 55-1510-219-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
SECOND ENGINE START (GPU CONNECTED) (CONT)
FUEL PRESS light should extinguish.
3. Condition lever (after N1 RPM
E1,J1
passes, 12% minimum) - LOW IDLE.
4. TGT and N1 - Monitor (TGT 1000°C
maximum, N 1 52% minimum).
5. Oil pressure - Check (60 PSI mini-
E4-6
mum).
6. Ignition and engine start switch -OFF after
TGT stabilized.
7. Propeller levers - FEATHER.
8. AC and DC GPU's - Disconnect. Check
aircraft EXTERNAL POWER annunciator
light and mission panel EXT AC PWR ON
and EXT DC PWR ON annunciator lights
extinguished.
9. Propeller levers - HIGH RPM.
E1
10. Inverter switches - ON, check IN-
C38,39
VERTER lights OFF.
11. Generator switches - RESET, then ON.
12. Strobe beacon lights switch - DAY or NIGHT
as required.
13. Condition levers - As required.
BEFORE TAXIING
1. Cabin temperature mode selector switch -
Set.
2-20
