TM 55-1510-219-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
associated IGN ON light should illuminate.
Associated
FUEL
PRESS
light
should
extinguish.
6. Condition lever (after N1 RPM sta-
E1,J1
bilizes, 12% minimum) - LOW IDLE.
7. TGT and N1 - Monitor (TGT 1000°C
maximum, N 1 52% minimum).
8. Oil pressure - Check (60 PSI mini-
E4-6
mum).
9. Condition lever - HIGH IDLE.
E1
Monitor TGT as the condition lever is
advanced.
10. Ignition and engine start switch -OFF after
TGT stabilized.
11. GPU disconnect - As required.
CAUTION
Do not turn on generators with GPU connected.
12. Generator switch (GPU disconnected) -
RESET, then ON.
SECOND ENGINE START (GPU CONNECTED)
1. Propeller - Clear.
2.
Ignition
and
engine
start
switch
-ON.
Propeller
should
start
to
rotate
and
associated IGN ON light should illuminate.
Associated
2-19
