TM 55-1510-219-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
3. Condition lever (after N1 RPM
E1,J1
passes 12% minimum) - LOW IDLE.
4. TGT and N1 - Monitor (TGT 1000°C
maximum, N 1 52% minimum).
5. Oil pressure - Check (60 PSI mini-
E4-6
mum).
6. Ignition and engine start switch -OFF after
TGT stabilized.
7. Battery charge light - Check (light should
illuminate approximately 6 seconds after
generator is brought on line. Light should
extinguish within 5 minutes following a nor-
mal engine start on battery).
8. Inverter switches - ON, check INVERTER
lights extinguished.
9. Second engine generator switch -RESET,
then ON.
10. Strobe beacon lights switch - DAY or NIGHT
as required.
11. Condition levers - As required.
ABORT START
1. Condition lever - FUEL CUTOFF.
2. Ignition and engine start switch -STARTER
ONLY.
3. TGT - MoN1tor for drop in temperature.
4. Ignition and engine start switch -OFF.
2-17
