TM 10-8415-206-12&P
4-30. NVG MOUNTING System No. 2
LOCATION/ITEM
ACTION
REMARKS
PREPARATION - Continued
b.
Move visor lock release button head (1)
down to bottom of track.
INSTALLATION
2.
Pile Fastener Tape (2)
NOTE
Perform the following step' on both sides of the pallor lock 13) to
establish on outline to Install the pile fastener tape (2).
a.
Measure 1/4-inch from top. of visor
housing (1) and mark. Repeat the
measurement and marking 2-inches from
the first mark. Draw a line.
Change 1 4-95
