TM 10-8415-206-12&P
4-29. NVG MOUNTING System No. 1-Continued
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION Continued
d.
Measure 2 l/4-inch from edge of visor lock
track and mark. Repeat the measurement
and marking 2-inches from the first mark.
Draw a line.
e.
Clean area using silicon carbide paper.
Sand lightly and remove dust with a clean
cloth moistened with denatured alcohol.
f.
Coat the area with synthetic rubber
adhesive. Let dry and apply a second coat.
g.
Cut two 3-inch lengths of pile fastener tape.
Coat the tape with synthetic rubber
adhesive. Let dry and apply a second coat.
When the coat becomes tacky, install the
tape to the visor housing.
Change 1 4-91