TM 10-8415-206-12&P
4-29. NVG MOUNTING System No. 1-Continued
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION
2.
Pile Fastener Tape (2)
NOTE
Perform the following steps on both sides of the visor lock (3) to
establish on outline to install the pile fastener tape (2).
a
Measure 1/4-inch from top of visor
housing (1) and mark. Repeat the
measurement and marking 2-inches
from the first mark. Draw o line.
b.
Measure 3 1/4-inch from top of visor
housing (1) and mark. Repeat the
measurement and marking 2-inches
from the first mark. Draw a line.
c.
Measure 1/4-inch from edge of visor
lock track (3) and mark. Repeat the
measurement and marking 2-inches
from the first mark. Draw a line.
Change 1 4-90
