TM10-6640-216-13&P
4-32. REMOVE/INSTALL REFRIGERATOR
This task covers:
a. Removal
b. Installation
INITIAL SET-UP:
Tools Required
General Mechanics Tool Kit, Appendix B, Item 1
Rivet Gun, Appendix B, Item 3
Drill and Bits, Appendix B, Item 2
Materials/Parts Required
Rivets, Appendix F
General Safety Instructions
WARNING
ELECTRICAL SHOCK
Before performing any maintenance actions on electrical equipment
ensure all electrical power has been turned off. Death or serious
injury may occur from failure to do this.
REMOVAL
Remove refrigerator. See figure 4-26.
a.
Unplug refrigerator power cord.
b.
Remove twelve mounting screws for refrigerator.
c.
Carefully slide defective refrigerator forward to gain access to drain hose.
d.
Loosen hose clamp and remove drain hose and hose clamp.
e.
Remove refrigerator and attached angle iron to a working surface.
f.
Drill out twelve blind pop rivets from the angle iron.
g.
Remove angle iron from refrigerator and remove refrigerator.
INSTALLATION
Install refrigerator. See figure 4-26.
a.
On a working surface place angle iron onto the new refrigerator and drill 12 holes.
b.
Rivet twelve .188 in. diameter blind pop rivets, six on each side connecting angle iron to
the refrigerator.
c.
Place the refrigerator and attached angle iron on countertop above storage cabinet No. 1.
d.
Connect drain hose and hose clamp to back of refrigerator.
4-88
