TM 1-1510-225-CL
E-15
6. Emergency exit hatch Remove and stow.
7. Seat belts and harnesses Fasten.
8. Gear manual extension handle Stow.
9. LDG GEAR CONTROL UP.
10. LANDING GEAR RELAY circuit breaker Pull.
11. LANDING GEAR WARN horn circuit breaker
Pull.
12. Nonessential electrical equipment Off.
13. FLAPS As required (DOWN is recommended
for landing).
14. POWER levers IDLE when landing on the
desired touchdown area is assured.
15. CONDITION levers FUEL CUTOFF.
16. Fuel
FIREWALL
SHUTOFF
VALVES
CLOSED.
17. MASTER SWITCH OFF.
LANDING WITH NOSE GEAR UNSAFE
1. Fuel load Reduce.
2. Crew and passenger briefings Complete.
3. Loose equipment Stow/secure.
4. BLEED AIR VALVES ENVIR OFF (below
10,000 feet).
5. Cabin Pressure switch DUMP (after cabin has
depressurized).
6. Emergency exit hatch Remove and secure.
7. Seat belts and harnesses Fasten.
8. Extension handle Stow.