TM 1-1510-225-10
3D-37
NAV 1
D/T 1
2 GPT
DIS 34NM
ETE :11
8 KPIE
DIS 477NM
ETE 2:39
E N R - L E G
KNEW GPT
DIS 34.2NM
GS 180KT
ETE :11
BRG 064o
+ + + + + + + + + +
Figure 3D-49. Non-Flight Plan, Distance/
Time 1 Page
b. Distance/Time 2 Page. When FPL 0 is
displayed on the left side and the D/T 2 page is
displayed on the right side, the distance and estimated
time of arrival are displayed for each of the active flight
plan waypoints. Refer to Figure 3D-50. The distances
are as described for the D/T 1 page. The time zone
may be changed by enabling the right cursor function
to bring the cursor over the time zone, and then
turning the right inner knob to select the desired time
zone. Changing the time zone on the D/T 2 page
changes the time zone on other pages where time is
displayed.
DIS UTC
34 15:23
76 15:37
163 16:06
243 16:33
477 17:51
D/T 2
E N R - L E G
1:KNEW
2:GPT
3:SJI
4:CEW
5:MAI
8:KPIE
FPL 0
Figure 3D-50. Distance/Time 2 Page
(1) If a numbered flight plan page other than
FPL 0 is displayed on the left side, no estimated times
of arrival are displayed.
(2) If a non-flight plan page is displayed on
the left side, the format of the D/T 2 page changes to
display just the distance and the estimated time of
arrival for the active waypoint and for the last waypoint
in the flight plan.
c. Distance/Time 3 Page. When any flight plan
page is displayed on the left side and the D/T 3 page
is displayed on the right side, the distance and desired
track are displayed. The distances are as described
for the D/T 1 page. The desired track is the great
circle course between two waypoints. Refer to Figure
3D-51.
DIS DTK
34 063o
76 061o
163 085o
243 092o
477 172o
D/T 3
E N R - L E G
1:KNEW
2:GPT
3:SJI
4:CEW
5:MAI
8:KPIE
FPL 0
Figure 3D-51. Distance/Time 3 Page
If a non-flight plan page is displayed on the left
side, the format of the D/T 3 page changes to display
just the distance and desired track for the active
waypoint and for the next waypoint in the flight plan.
Note that this is different from the D/T 1 and D/T 2
pages
d. Distance/Time 4 Page. The format for the
D/T 4 page does not change. Refer to Figure 3D-52.
It displays on a single page the pertinent times for the
flight regardless of what is displayed on the left side
and regardless of whether flight plan or direct to
operation is occurring. The following information is
displayed on the D/T 4 page.
KPIE UTC
DEP 15:02
TIME 15:12
ETA 17:51
FLT :10
ETE 2:39
D/T 4
Figure 3D-52. Distance/Time 4 Page
(1) The destination waypoint.
(2) The Selected Time Zone. The time zone
may be changed by pressing the right CRSR button
and using the right inner knob to select the desired
time zone.
(3) The Departure Time. There are two
definitions of departure time depending on what has
been selected on the SET 4 page. If the SET 4 page
displays, RUN WHEN GS > 30 knots, the departure
time is that time when the groundspeed first reached
30 knots. If the SET 4 page displays, RUN WHEN
POWER IS ON, the departure time is the time when
power was applied to the KLN 90B.