TM 1-1510-225-10
3A-80
1. Line select key – Press to position
cursor over the STAR waypoint
identifier that will follow the new
entry.
2. Waypoint identifier – Insert.
3. ENTER key – Press twice.
NOTE
The previously indented STAR waypoints
move over one space to the left on the
screen
and
are
treated
as
normal
waypoints in the flight plan.
(l) Deleting a STAR Waypoint.
1. Line select key – Press to position
cursor over the STAR waypoint
identifier that will follow the new
entry.
2. BACK key – Press.
3. ENTER key – Press.
(m)
Entering an Approach. Refer to
Figures 3A-62 and 3A-63.
NOTE
The system must be configured for radio
tuning or VOR inputs to execute RNAV
approaches.
1. Line select key – Press to position
cursor over APPROACH? field.
2. ENTER key – Press to display
Approach page.
3. APPROACH airport – Verify or
insert valid identifier.
NOTE
If the runway or approach type selected on
the Approach page differs from the runway
or approach type dictated by the STAR,
SEL RWY FROM STAR PG is displayed at
the bottom of the screen.
If there are no approaches associated with
the approach airport, the message NO
APPROACH
AVAIL
appears
and
the
identifier field flashes. Press FPL key to
return to active flight plan.
4. Line select key – Press to position
cursor over the desired RUNWAY.
5. ENTER key – Press to select
RUNWAY. Cursor will move to
the TRANSITION field.
6. Line select key – Press to position
cursor
over
the
desired
TRANSITION.
7. ENTER key – Press to select
TRANSITION.
8. APPROACH waypoints - Review.
9. ENTER key – Press to insert
APPROACH into active flight plan
and return to the Active Flight Plan
page.
Figure 3A-62. Approach 1/2 Page (Sheet 1 of 2)
Figure 3A-62. Approach 2/2 Page (Sheet 2 of 2)
