TM 1-1510-223-10
Change 3 8-15
i. Rotating boom dipole antennas — Check
condition and position.
j. Data link antenna radome — Check condi-
tion.
f. Fuselage Left Side. Check as follows.
1. Fuselage left side — Check.
* a. General condition — Check.
b. Stabilon and static wick — Check condi-
tion.
c. P-band — Check condition.
d. Static ports — Check clear of obstruction.
e. ELT — ARMED.
f. Deleted.
g. APR-44 antennas — Check condition.
h. Emergency light — Check condition.
i. Cabin door — Check seal and condition.
j. Fuselage top side — Check general con-
dition and antennas.
* k. Chocks and tiedowns — Check removed.
8-12. *INTERIOR CHECK.
1. Cargo/loose equipment — Check secured.
2. Cabin/cargo doors — Test and lock:
a. Cabin door — Check closed and latched
by the following:
(1) Safety arm and diaphragm plunger —
Check position (lift door step).
(2) Index marks on rotary cam locks (6)
— Check aligned with indicator win-
dows.
b. Cargo door — Check closed and latched
by the following:
(1) Upper handle — Check closed and
latched (Observe through cargo door
latch handle access cover window).
(2) Index marks on rotary cam locks (4)
— Check aligned with indicator win-
dows.
(3) Lower pin latch handle — Check
closed and latched (Observe through
cargo door lower latch handle access
cover window).
(4) Carrier rod — Check orange indicator
aligned with orange stripe on carrier
rod (Observe through window, aft
lower corner).
c. BATTERY switch — OFF.
d. Cargo door — Check closed and latched.
e. Cabin door — Close but leave unlatched.
Check CABIN DOOR annunciator light il-
luminated.
f. Cabin door — Open. Check CABIN
DOOR annunciator light extinguished.
g. BATTERY switch — ON. Check CABIN
DOOR annunciator light illuminated.
h. Cabin door — Close and latch. Check
CABIN DOOR annunciator light extin-
guished.
NOTE
The above procedures check both cargo and
cabin door security provisions.
3. Emergency exit — Check secure and key re-
moved.
4. Mission cooling ducts — Check open and free
of obstructions.
5. Flare/chaff dispenser preflight test — Com-
pleted.
6. COMSEC keys — Loaded as required.
7. Crew briefing — As required.
8-13. BEFORE STARTING ENGINES.
* 1. Oxygen system — Set as required.
2. Circuit breakers — Check in.
* 3. Overhead panel — Check and set.
a. Light dimming controls — As required.
b. Cockpit lights (3) — As required.
