TM 55-1510-222-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
FIRST ENGINE START (CPU START) (CONT)
11. Condition lever - HIGH IDLE.
E2
Monitor TGT as the condition le-
ver is advanced.
12. DC GPU - Disconnect as required.
Do not turn on generators with GPU con-
nected.
13. First engine generator switch - RE-
SET, then ON.
SECOND ENGINE START (CPU CONNECTED)
1. Propeller - Clear.
2. Ignition and engine start switch -
A1-7
ON. Propeller should start to rotate
and associated IGN ON light
should
illuminate.
Associated
FUEL PRESS light should extin-
guish.
3. Condition lever (after N1 RPM
passes,
12% minimum) - LOW
IDLE.
E1,J1
4. TGT and N1 - Monitor (TGT
1000°C maximum, N1 61% mini-
mum).
5. Oil pressure - Check (60 PSI mini-
mum).
E7-9
6. Ignition and engine start switch -
OFF after TGT peaks.
2-20
