TM 10-8415-206-12&P
Section VII. SHELL, HELMET
4-27. HELMET SHELL REPAIR
This task covers:
a.
Inspection
c.
Repair
b.
Removal
d.
Installation
INITIAL SETUP
Tools
Screwdriver, Flat Tip,1/4 inch Blade
(NSN 5120-00-222-8852)
Materials/Parts
Clean rags Adhesive (NSN 8040-00-273-8717) Appendix D, Item No.12
Denatured alcohol (NSN 6505-00-299-8095) Appendix D, Item No.13
Sandpaper #80 grit (NSN 5350-00-598- 5537) Appendix D, Item No.14
Personnel Required
Aviation Life Support Equipment
(A.L.S.E.) Specialist/Technician or
Personnel with ASI of Q2 (A.L.S.E.-Qualified)
LOCATION/ITEM
ACTION
REMARKS
Rubber base adhesive is highly flammable. Do not use while smoking or in
the vicinity of an open flame.
NOTE
The only repair authorized to the helmet shell is to the boom microphone
attachment hole, which will be addressed in this section.
4-83
