TM 10-8415-206-12&P
4-25. PAINTING PROCEDURE-Continued
LOCATION/ITEM
ACTION
REMARKS
PREPARATION-Continued
6.
Sand area to be painted using silicon
carbide paper.
7.
Wipe sanded area with a clean cloth.
NOTE
Any surface scratch, nick or gouge which cannot be
feathered smooth will be cause for rejection of the
helmet shell.
PAINTING
Paint could be flammable or toxic in sufficient concentrations, and it could
cause dermatitis with skin contact. Care should be taken to avoid breathing the
vapors and skin contact. Avoid use while smoking or in the vicinity of open
flames.
1.
Place helmet on a stand.
2.
Paint helmet with heat resistant lusterless enamel.
3.
Allow 72 hours drying time.
NOTE
Be sure first coat is fairly well set before applying second coat.
4.
Apply second coat if required.
4-80
