TM 10-8415-206-12&P
4-24. BEADING-Continued
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1.
Beading (1)
a.
Remove from helmet shell (2).
b.
Remove old adhesive from helmet by rubbing with a
clean cloth.
REPLACEMENT
Replace damaged or defective beading with a serviceable like item.
INSTALLATION
Synthetic rubber base adhesive is highly flammable. Do not use while smoking
or in the vicinity of an open flame.
2.
Beading (1)
a.
Coat helmet edge with synthetic rubber
adhesive
b.
Install beading (1).
c.
Remove any excess adhesive from
helmet shell (2).
4-77