TM 10-8415-206-12&P
4-25. PAINTING PROCEDURE-CONTINUED
LOCATION/ITEM
ACTION
REMARKS
PREPARATION
1.
Disconnect connectors (I and 8)
from each end of microphone
cord.
2.
Remove microphone cord (3).
3.
Remove adjusting nut screw (4),
adjusting nut (5) and washer (6).
4.
Remove boom (7) and
microphone (2).
NOTE
Mask rubber grommet and connector, beading and sides of visor tracks.
5.
Secure ear cups inside upper
Use heavy wrapping
area of helmet and cover interior
paper or several
of helmet.
layers of newspaper
to line helmet.
NOTE
Do not use solvents or thinner .
Change 2 4-79
