TM 1-5855-265-20
3-5
3-3. MOVING PNVS TURRET ASSEMBLY MANUALLY
INITIAL SETUP
Tools
Aircraft armament repairman tool set
Personnel Required
68X Aircraft Armament/Electrical Repairer
References
TM 1-5855-265-T
TM 1-1520-238-23
Equipment Conditions
Ref
Condition
Para 3-2
Premaintenance
procedures performed
OUT OF STOW
1. Open leftside fairing assembly (2) by loosening
two captive screws (1).
CAUTION
Never rotate a turret without having electrical
power to release brake. Rotating a turret
against a locked brake will damage azimuth
drive gimbal assembly.
NOTE
If brake release power supply assembly is not
connected, perform step 3 below.
2. Set MODE switch (3) on brake release power
assembly (4) to PNVS position.
110-001
2
1
470-002A
3
4
