TM 1-5855-265-20
2-7
2-5. REUSABLE SHIPPING AND STORAGE CONTAINER PACKING INSTRUCTIONS (cont)
CAUTION
The container can be damaged if lid is
improperly installed. The lid is keyed to
the lower half of container. Several weld
beads are located in rim of lid to prevent
engagement of latches.
3. Install lid (2).
a. Position lid (2) above lower half of container
(3) so that weld beads (4) are not lined up
with latches (5).
b. Put lid (2) on lower half of container (3).
4. Secure latches.
a. Hook catch (6) onto rim of lid.
b. Grasp latch handle (7) and push up and in
toward container.
5. Install new identification label.
a. Lift retainer spring (8), remove container ID
plate (9) from plate holder (10), and release
spring.
b. Remove and discard old LRU ID plate (11)
from container ID plate (9).
c. Remove paper backing from new LRU ID
plate marked in step 1 above and install
plate where old LRU ID plate was removed.
d. Lift retainer spring (8), install container ID
plate (9) in plate holder (10), and release
spring.
END OF TASK
HOOK
6
3
7
2
PUSH
400-007A
2
4
10
11
8
9
3
5
400-048A
