TM 1-1510-233-CL
P-16
b. NAV SETUP (R5) line selection button –
Depress.
c. True bearing – Enter into scratchpad.
d. BEARING (L1) line selection button – De-
press.
e. Leg length in NM – Enter into scratchpad.
f.
LEG LENGTH (L2) line selection button –
Depress.
g. TURN DIRECTION (L3) line selection but-
ton – Depress to select LEFT or RIGHT.
h. Offset distance in NM – Enter into scratch-
pad.
i.
OFFSET (L4) line selection button – De-
press.
5.
Waypoint move mode – Program as follows:
a. True bearing – Enter into scratchpad.
b. BEARING (R1) line selection button – De-
press.
c. Range in NM – Enter into scratchpad.
d. RANGE (R2) line selection button – De-
press.
AVIONICS
1.
VHF communication radios (#1 and #2) –
Press TEST and observe the following:
a. Normal – Dashes displayed in active dis-
play and 00 in present display.
b. Fault – “DIAG” in active display and a two
digit fault code in preset display.
