TM 1-1510-223-CL
P-15
b. ROUTES (R5) – Depress.
c. Route – Select 1st, 2nd, or 3rd to enter
WPT numbers by depressing the ap-
propriate line button to store the WPT’s.
d. Routes to use as the active FPLN – Select
and depress the adjacent line button to
box it.
e. NEW FPLN (L1) – Depress to activate the
FPLN.
3.
TACAN – Build as follows:
a. Mode switch B – Depress to select FPLN
page.
b. TACAN LIST (R5) line selection button –
Depress.
c. TACAN station information (list number,
ID, channel number, latitude/longitude,
and station elevation) – Enter into scratch-
pad.
d. ADD/SEL (R1) line selection button – De-
press to load into system or load TACAN
list using the DTS by depressing NAV
DATA (L1) on the DATA TRANSFER
page.
e. TACAN stations to be used for updating –
Select and enter into scratchpad.
f.
TACAN SELECT (R4) line selector button
– Depress.
4.
Pattern steering mode – Program as follows:
a. Mode switch B – Depress to select FPLN
page.
