TM 1-1520-218-10 3C-169 Figure 3C-120.  GPS Integrated Navigation Page Table 3C-82.  GPS Integrated Navigation Page Procedure NO. DESCRIPTION/FUNCTION 1 Indicates present GPS position. 2 95% probably position error. 3 Selects GPS RAIM page. 4 Indicates the current RAIM Status. 5 Difference from designated pilot’s source. 6 Number of GPS satellites tracked. 7 The GPS receiver state. 8 The current GPS tracking/aiding mode. (b)   GPS  Satellite  Data.    The  FMS-800 provides  the  crew  access  to  the  page  displaying  the individual channel/satellite tracking status for the GPS receiver.    Selecting  the   SATS  line  select  key  on  the GPS   INAV   page   will   access   this   page.      Refer   to Figure 3C-121 and Table 3C-83. NOTE The    possible    state    displays    are    listed below. 1, 2 S Search 4, 6 T Tracked 3 I Interference 5 D Tracked with data 7 R Recovery Figure 3C-121.  GPS Satellite Data Table 3C-83.  GPS Satellite Data Procedure NO. DESCRIPTION/FUNCTION 1 Pressing    line    select    key    SATS     will access     the     channel/satellite     tracking status page. 2 Indicates   s atellite   vehicles   in   track   or search. 3 Indicates   the   carrier   to   noise   ratio   of satellite signal. 4 Indicates tracking state of satellite channel. 5 The frequency and code in track. The GPS satellite data page provides information regarding the current tracking state of each GPS   receiver   channel.      This   page   also   provides information    on    which    satellite    is    currently    being tracked,  current  carrier  to  noise  ratio  for  the  incoming signal,  frequency  and  code  types  being  tracked,  and the current state of receiver tracking. (c)   GPS Receiver Autonomous Integrity Monitoring  (RAIM).    The  FMS-800  provides  the  crew access to a page providing the RAIM control/predictive RAIM for the active GPS receiver.  Selecting the RAIM line   key   on   the   GPS   INAV   page   accesses   these pages.  Refer to Figure 3C-122 and Table 3C-84