TM 1-1520-218-10 3C-162 Figure 3C-109.  Data Page Access and Leg or Waypoint Scrolling/Selection Table 3C-76.  Data Page Access and Leg or Waypoint Scrolling/Selection Procedure   NO. DESCRIPTION/FUNCTION 1 Press  DATA function key to display DATA FOR? in the scratchpad. 2 Access Data page for waypoint DBQ. 3 The    Data    page    displays    data    for    the FROM–TO pair of CID and DBQ waypoints. 4 Select between flight play FROM waypoint, PPSN DIRECT, or PPSN VIA FPLN. 5 Insert a nonflight plan waypoint. 6 Select     either     waypoint     WPT     or     LEG scrolling. Table 3C-76.  Data Page Access and Leg or Waypoint Scrolling/Selection Procedure   (Continued) NO. DESCRIPTION/FUNCTION 7 Scroll    through    flight    plan    legs    (if    LEG selected) or waypoints (if WPT selected). 8 Scrolling  down  displays  data  for  the  next waypoint in the flight plan. After  the  Data  page  has  been  accessed,  other TO waypoints may be selected or entered.  FROM–TO display options can also be selected also. If  the  initially  selected  waypoint  is  a  flight  plan waypoint,  press  the  vertical  scroll  key  ü or  þ  to  scroll leg  by  leg  through  the  flight  plan,  Option  1,  Figure 3C-110. To  freeze  the  FROM  waypoint,  press  the  line select key to select  WPT.  Then press the or arrow keys  to  scroll  from  waypoint  to  waypoint  through  the flight  plan  while  retaining  the  same  FROM  waypoint, Option 2, Figure 3C–111. To  view  a  direct  segment  FROM  a  flight  plan waypoint TO a nonflight plan waypoint, scroll the flight plan   in   the   LEG   mode   until   the   desired   FROM waypoint  is  at  the  top  of  the  page.    Then  insert  the desired  TO  waypoint  on  data  line  2  in  place  of  the existing TO waypoint, Option 3, Figure 3C–112. To  view  data  from  present  position  to  any  flight plan waypoint, scroll the flight plan so that the desired TO  waypoint  is  on  data  line  2.    Then  select  either PPSN DIRECT or  PPSN VIA FPLN at line select key 1L, Option 4, Figures 3C–113 and 3C-114. To  view  data  from  present  position  to  a  non– flight  plan  waypoint,  select  PPSN  DIRECT  and  insert the  desired  waypoint  in  place  of  the  TO  waypoint  on data line 2, Option 5, Figure 3C–115. (b)   Data    Page    Displayed    Information. The  Data  page  presents  data  related  to  the  selected DATA    FOR?    Waypoint,    which    is    called    the    TO waypoint  of  the  FROM–TO  waypoint  pair.    Refer  to Figure  3C–116  and  Table  3C-77,  data  line  2.    It  also shows  data  for  the  FROM–TO leg and the ETA for a hypothetical    flight    either    via    the    active    flight    plan routing to the FROM waypoint and to the TO waypoint along   the   displayed   leg   or   directly   FROM   aircraft present   position   TO   the   displayed   waypoint   (PPSN DIRECT),  or  from  aircraft  present  position  along  the flight   plan   to   a   waypoint   (PPSN   VIA   FPLN).      The present   position   in   this   case   is   the   position   of   the designated pilot’s navigational solution.