TM 55-4920-403-20&P
b. The power distribution panel (item 1, figure D-5)
No. 6 AWG wire of suitable length. Always keep
is provided to isolate shelters electrically from each
ground cables as short as possible. For addi-
other, to provide a means of safely connecting and
tional information, refer to TC 11-6 GROUNDING
disconnecting individual shelters without disturbing
TECHNIQUES.
others in the complex, and to progressively load the
generator.
1-13. Spares, Repair Parts, Special Tools and
Other Special Support Equipment.
c. Supplied ground rod and grounding cable
are intended for field use. If shelter is operated on
a. There are no special tools or equipment required
a hard stand, drive ground rod as close to shelter
for maintenance of the S-280 shelter.
as possible or use other suitable existing nearby
b. Repair parts are listed in Appendix C for the
ground. DO NOT SPLICE GROUND CABLE. If
shelter modification. Repair parts for the basic S-280
supplied ground cable is too short, use at least
shelter are listed in TM 11-5410-213-14P.
Change 3 1-3/(1-4 blank)
