TM 55-1510-222-CL
7.
Oil pressure - Check (60 PSI minimum).
8.
#1 ignition and engine start switch - OFF after TGT peaks.
9.
Condition lever - HIGH IDLE.
10.
DC GPU disconnect - As required.
11.
Generator switch RESET then ON.
* SECOND ENGINE START (GPU START)
1.
Propeller area - Clear.
2.
#2 ignition and engine start switch - START IGNITION.
3.
Condition lever (after N1 RPM passes 13% minimum) - LOW IDLE.
4.
TGT and N1 - Monitor (TGT 1000°C maximum).
5.
Oil pressure - Check (60 PSI minimum).
6.
#2 ignition and engine start switch - OFF after TGT peaks.
7.
Condition lever - HIGH IDLE.
8.
Propeller levers - FEATHER (if required).
9.
AC and DC GPU units - Disconnect.
10.
Propeller levers - Advance, then retard to feather detent.
11.
Power levers - GROUND FINE.
12.
Inverter switches ON, - Check INVERTER annunciators extinguished.
13.
Generator switches - RESET, then ON.
14.
Beacon light - Reset.
N-12
