TM 55-1510-222-CL
5.
Radio altimeter - As required.
6.
Altimeters - Set to current altimeter setting.
(7). Flare/chaff dispenser arm-safe switch - SAFE.
(8).
Flare/chaff dispenser safety pin (electronic module) - Insert.
9.
Condition lever- HIGH IDLE.
10.
Arrival briefing - Complete.
BEFORE LANDING
1.
Propeller synchronizer switch - OFF.
(2).
Autofeather switch - ARM.
3.
Propeller levers - HIGH RPM.
4.
Flaps (below 197 KIAS) - APPROACH.
5.
Gear (below 178 KIAS) - DN.
6.
Landing lights - As required.
(7).
Brake deice - As required.
LANDING
1.
Autopilot and yaw damp - Disengaged.
2.
GEAR DOWN annunciators - Check.
3.
Flaps - As required.
4.
Power levers - Lift and retard to GROUND FINE.
5.
Brakes - As required.
TOUCH AND GO/STOP AND GO LANDING
1.
Propeller levers - HIGH RPM.
2.
Flaps - As required.
3.
Trim - Set.
4.
Power stabilized - Check 25% minimum.
5.
Takeoff power - Set.
C1 N-16
