TM 55-1510-222-CL
16.
DC power - Check.
17.
Annunciator panels - Test.
* FIRST ENGINE START (BATTERY START)
1.
Exterior lights switches - As required.
2.
Propeller area - Clear.
3.
#2 ignition and engine start switch - START IGNITION.
4.
Condition lever (after N1 RPM passes 13% minimum) - LOW IDLE.
5.
TGT and N1 - Monitor (TGT 1000°C maximum).
6.
Oil pressure - Check (60 PSI minimum).
7.
#2 ignition and engine start switch - OFF after TGT peaks.
8.
Condition lever - HIGH IDLE.
9.
Generator switch - RESET, then ON.
* SECOND ENGINE START (BATTERY START)
1.
Propeller area - Clear.
2.
#1 ignition and engine start switch - START IGNITION.
3.
Condition lever (after N1 RPM passes 13% minimum) - LOW IDLE.
4.
TGT and N1 - Monitor (TGT 1000°C maximum).
5.
Oil pressure - Check (60 PSI minimum).
6.
#1 ignition and engine start switch - OFF after TGT peaks.
7.
Condition levers - HIGH IDLE.
8.
Power levers - GROUND FINE.
9.
Propeller levers - Retard to feather detent.
N-10
