TM 55-1510-220-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
(4) Generator switch - OFF.
(5) Propeller synchronization switch - OFF.
g.
Engine restart.
(1) Cabin temperature mode selector switch - As required.
(2) Electrical load - Reduce to minimum.
(3) Fire pull handle - In.
(4) Power lever - IDLE.
(5) Condition lever - FUEL CUTOFF.
(6) TGT (operating engine) - 700°C or less.
(7) Ignition and engine start switch - ON.
(8) Condition lever - LOW IDLE.
(9) TGT - 1 000°C, 5 seconds maximum.
(10)
Ignition and engine start switch - OFF at 50% N1.
(11)
Generator switch - RESET, then ON.
(12)
Engine cleanup - Perform if engine restart is unsuccessful.
(13)
Cabin temperature mode selector switch - OFF.
(14)
Autoignition switch ARM.
2-51
