TM 5-6630-218-10
2.5.5
Figure 2.31 Attaching the Remote Sampling
Cap and Bypass Hose
Connect Sampler to Quick-Release Valve
a.
Remove the protective cap and plug from the quick-release valve,
inlet hose nipple, and sample valve (Figure 2.8).
b.
The three-way valve must be in the OFF position before attaching
the sampler to the remote assembly the valve is closed or off when the
valve arm is positioned approximately 45 degrees from the base of the
valve (Figure 2.32).
Figure 2.32 Three-Way Valve
- OFF Position
2 - 3 5
