TM 5-6630-218-10
Figure 2.30 Inserting the Monitor into
Sampler Base
b.
Connect the bypass hose from the three-way valve to either bypass
port located on the sides of the base (Figure 2.6). Press the hose down
firmly into the port for a tight fit.
2.5.4 Attaching the Remote Sampling Cap and Bypass Hose
a.
Thread the remote sampling cap and bypass hose into the base of
the sampler.
b.
Force the nylon plug into the port located on the side of the
sampler base (Figure 2.31).
2 - 34
