Figure 11-11. Fabrication of bearing and seal tool.
Table 11-6. Fabricated Special Tools
Reference
Figure
Item
Number
Paragraph
Use
11-12c, 11-12d
Hold magneto rotor when removing or in-
Rotor locking tool
11-8
stalling rotor shaft nut or pump impeller.
11-13d
Remove and install cylinder nuts.
Offset wrench
11-9
11-13d
Remove and install needle bearing in con-
Needle bearing assembly tool
11-10
necting rod (piston end)
11-13d, 11-13f
Remove needle bearing and seal from
Bearing and seal tool
11-11
crank-case; remove and install needle
and seal in pump bearing housing, and
install needle bearing in crankcase and
pump bearing housing.
11-13d, 11-13f
Install seals in crankcase, and pump bearing
Seal assembling plug
11-12
housing.
11-12c, 11-13d
Protect seal when installing crankshaft into
Seal assembling sleeve
11-13
crankcase.
11-13d
Remove piston pin from piston.
Piston pin removal tool
11-14
11-17
