TM 10-8415-206-12&P
4-32. AN/AVS-6(V)1 and (V)2 MOUNTING - Continued
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION - AN/AVS-6(V)1 - Continued
2.
Visor Installation in ANVIS Visor Housing
a.
Use screwdriver from carrying case.
d.
Turn stem one-fourth turn and slide it
Remove guard lock lockstem (7) from
out of slots in SPH-4 visor housing
SPH-4 visor housing by turning it clock-
and visor.
wise.
e.
Separate visor from SPH-4 visor
b.
Unscrew by hand the guardlock re-
housing.
lease button head.
f.
Remove screw (9) and nut (10) from
c.
Pick button-head washer (8) up off the
extension strap (11).
stem.
g.
Insert nut (10) into slot in visor (12).
Place extension strap over nut. Insert
screw.
h.
Tighten screw carefully. Do not over
tighten.
i.
Position stem (7) up through the slots
(13) in extension strap and mount.
j
Place button-head washer (8) onto
stem (7).
k.
Screw lock release button head (14)
by
hand onto stem.
I.
Use screwdriver to screw guard lock
assembly stem center screw (15)
counterclockwise into stem.
m.
Lock visor in full UP position.
n.
Align spacers with attachment screw
holes.
o.
Align visor and mount with frocks in
helmet.
Change 1 4-130
Change 1 4-130