TM 10-8415-206-12&P
4-23.1 THERMO PLASTIC LINER (TPL) ASSEMBLY
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION-Continued
8. Rubber Plugs
Insert 3 rubber plugs (1) into the three
forward holes where the suspension
assembly screws were located (2) in
helmet shell (3).
9. Visor housing (1)
a. Install visor (3) in visor tracks.
b. Install spacers (5) on visor tracks (4).
c. Install visor housing (1) to helmet with
four screw assemblies (2) and tighten.
Change 4
4-76.5
