TM 1-8415-215-12&P
3-11. Communications Cord.
Removal
1.
Unplug microphone cord from connector at rear of helmet.
2.
Remove two screws securing jack plate and mounting plate to helmet shell.
3.
Remove thermoplastic liner and energy-absorbing liner per paragraph 3-5, removal steps 1-3.
4.
Remove screw, washer, and post securing cord strain relief from left rear of helmet (see Figure 3-10).
5.
Remove earphones per paragraph 3-8, removal step 2.
6.
Remove grommet from helmet shell, and remove communications cord from helmet (pull from inside out).
Figure 3-10. Location of Communications Cord Strain Relief
3-24
