TM 1-8415-215-12&P
Installation
NOTE
Install nut plate (if available) or glue all four visor posts.
1. Slide replacement energy-absorbing liner into helmet (use spatula). Apply slight pressure to engage hook-and-pile
fasteners.
NOTE
Holes in plastic layers and label on cloth cover should be positioned toward the front of the helmet (Figure
3-3).
2. Squeezing sides of thermoplastic liner, reinstall it in helmet (see Figure 3-2). Ensure hook-and-pile fasteners are
engaged.
3. Reinstall earcups per paragraph 3-8, Installation steps 2 and 3.
Figure 3-2. Liner Removal/Installation
3-13