TM 1-1510-224-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
DESCENT-ARRIVAL (CONT)
CAUTION
Set windshield anti-ice to NORMAL or HIGH as
required well before descent into icing conditions or
into warm moist air to aid in defogging. Turn off
windshield anti-ice when descent is completed to
lower altitudes and when heating is no longer
required. This will preclude possible wind screen
distortions.
3.
WINDSHIELD anti-ice - As required.
4.
RECOG lights - On.
5.
Altimeters - Set to current altimeter
setting (QNH) when passing through
transitional altitude.
6.
ASE - As required.
7.
Flare/chaff dispenser safety pin - Insert.
8.
Avionics and EFIS display controller -
Set and check. Ensure EFIS displays
match procedure to be flown.
9.
Arrival briefing - Complete.
BEFORE LANDING
1.
PROP SYN switch - OFF.
2.
AUTOFEATHER switch - ARM.
3.
ICE VANE CONTROL switches - As
required.
4.
PROP levers - As required.
5.
Flaps (below 197 KIAS) - APPROACH.
2-84
