TM 1-1510-218-10   3C-51 Table 3C-12.  Operating Parameters  (Continued) MODE CONTROL OR SENSOR PARAMETER VALUE Heading HSI Heading Roll Angle Limit ± 25° Select Select Knob Roll Rate Limit ± 3.5°/sec CAPTURE VOR Course Knob, NAV Receiver and DME Beam   Angle   Intercept   (HDG SEL) Up to ± 90° Roll Angle Limit ± 25° Course Cut Limit at Capture ± 45° Course Capture Point Function of beam, beam rate, course error, and DME distance ON COURSE Roll Angle Limit ± 13° Roll Crosswind Up to ± 45° Correction Course Error OVER STATION Course Change Up to ± 90° Roll Angle Limit ± 17° LOC CAPTURE LOC    or    APR    or BC Course  Knob  and  NAV Receiver Beam Intercept Up to ± 90° Roll Angle Limit ± 25° Roll Rate Limit ± 5°/sec Capture Point Function  of  Beam,  Beam  Rate  and Course Error NAV ON-COURSE Roll Angle Limit ± 17° Roll Crosswind ± 30° of course Correction Limit error Gain Programming Function  of  Time  and  (TAS)  starts at 1200-ft radio altitude GLIDESLOPE CAPTURE LOC    or    APR    or BC GS   Receiver   and   Air Data Computer Beam Capture Function of beam and beam rate Pitch Command Limit ± 10° Glideslope Damping Vertical Velocity Pitch Rate Limit Function of (TAS) Gain Programming Function  of  Time  and  (TAS)  Starts at 1200-ft radio altitude Function   of   (Radio   Alt)   Starts   at 250  ft