TM 1-1510-218-10 3-10 been   selected   with   the   left   outer   knob,   the   page number is selected by rotating the left inner knob. The right side operates in a similar manner.  The navigation  pages  are  available  on  both  sides.    The remainder  of  the  page  types  are  different.    Refer  to Table 3-2. Only the right inner knob has both an in and an out position.  With the knob pushed in, it works exactly as the left inner knob.  In the out position, it performs a waypoint  scan  function.    The  usual  position  for  the right inner knob is the in position. (2)   Waypoint Data Entry. 1.   Press   cursor   to   turn   on   the   cursor function. 2.   Rotate  the  outer  knob  to  position  the cursor   in   the   desired   location.      The location will vary.  Waypoint identifiers will be in different places on the page depending on the type page selected. 3.   Rotate   the   inner   knob   to   select   the first character of the waypoint identifier. 4.   Move the outer knob one step clockwise  to  move  the  cursor  to  the second character position. 5.   Rotate   the   inner   knob   to   select   the second character. 6.   Use  the  outer  and  inner  knobs  in  this manner   until   the   complete   waypoint identifier is displayed. Table 3-1.  Left Side Types PAGE IDENTIFIER KNOB MARKING PAGE NAME PAGE NUMBERS TRI TRIP Trip Planning 0–6 MOD MODE Mode 1–2 FPL FPL Flight Plan 0–25 NAV NAV Navigation 1–5 CAL CALC Calculator 1–7 STA STAT Status 1–5 SET SETUP Setup 0–9 OTH OTHER Other 1–4* *Up to 10 with fuel management system and air data interfaces. Table 3-2.  Right Side Types PAGE IDENTIFIER KNOB MARKING PAGE NAME PAGE NUMBERS CTR CTR Center WPT 1–2 REF REF Reference WPT None ACT ACTV Active WPT * D/T D/T Distance/Time 1–4 NAV NAV Navigation 1–5 APT APT Airport WPT 1–8 VOR VOR VOR WPT None NDB NDB NDB WPT None INT INT Intersection WPT None SUP SUPL Supplemental WPT None *Varies with the type of waypoints in the active flight plan.