TM 55-1510-221-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
DURING CLIMB (CONT)
to INNER position and note a
.05 increase in each loadmeter
indication
*7Windshield anti-ice system - Check
operation as follows:
a. Pilot's windshield anti-ice
switch - NORMAL, check by
feel for heat.
b.
Pilot's windshield anti-ice
switch - HI, check for an in-
creased loadmeter Indication,
then OFF.
c. Copilot's windshield anti-ice
switch - Check by repeating
above steps.
*8 Radome anti-icing system - Check
as follows:
a. Radome anti-ice switch - ON.
b. Loadmeters - Monitor for in-
crease.
c.
RADOME HEAT annunciator
light - Check Illuminated with-
in 5 minutes.
d. RADOME HOT annunciator
light - Check extinguished.
*9.
Waveguide pressurization system -
Verify that the WAVE GUIDE an-
nunciator light is illuminated when
N1 is above 80%.
*10.
Cabin and cockpit ventilation sys-
tem - Check the following items for
flow of air, binding controls and
2-42
