TM 55-1510-221-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
NOTE
Listen for unusual noises during landing
gear retraction
*2.
Tail boom antenna Check that ANT
OPERATE annunciator light illuminates
after landing gear has been retracted
3.
Flap switch UP
4.
Landing lights OFF
5.
Climb power Set
6.
Propeller synchronization switch As required
7.
Yaw damp switch As required
8.
Autofeather switch As required
9.
Cabin pressurization Check
*10. Wings and nacelles Check for fuel and oil
leaks.
*11. Brake device system Check as follows:
a.
Brake DEICE ON annunciator light
Check extinguished within
approximately 10 minutes after landing
gear retraction
b.
Brake device switch Turn off then on
and observe that BRAKE DEICE ON
light does not illuminate.
c.
Landing gear switch DN. Observe
BRAKE DEICE ON light illuminates
2-39
