TM 55-1510-221-MTF
PROCEDURE
TROUBLESHOOTING
REFERENCE
5.
Flight and engine Instruments Check for
normal indications.
6.
Cabin altitude and rate-of-climb controller
Set.
7.
Annunciator panels Check (note
Indications).
8.
Propeller levers HIGH RPM.
9.
Flaps As required.
10. Trim Set.
11. Avionics Set.
12. Flight controls Check.
13. Departure briefing Complete.
LINE UP
I.
Transponder As required.
2.
Engine Autoignition switch ARM.
3.
Condition levers LOW IDLE.
4.
Lights As required.
5.
Brake device system Check as follows when
required:
NOTE
Do not activate brake device system above 15°C FAT
a.
Brake device switch ON.
b.
Check that BRAKE DEICE ON light is
illuminated, then is extinguished
approximately 10 minutes after landing
gear retraction
2-37
