TM 5-6630-218-10
Figure 2.16 Attaching the Remote Sampling Assembly
2.4.5 Connecting the Sampler Valve Hose Assembly to the Quick-
Release Valve
a.
Follow the procedure for connecting the sampler valve hose
assembly to the quick-release valve as described in Section 2.3.6. Refer to
Figures 2.7, 2.8, and 2.9.
The Sampler Valve Hose Assembly must be properly grounded to avoid
possible fire or explosion from static electrical charges. An electrical
continuity test of the ground hook-up should be performed prior to
test to assure conductance of electrical charges from system to ground.
2-17