TM 10-8415-206-12&P
4-30. NVG MOUNTING System No. 2
LOCATION/ITEM
ACTION
REMARKS
INSTALLATION - Continued
NOTE
The helmet must be properly fitted to the user prior to attaching the
NVG for final adjustment.
l.
Insert second snap release assembly into
the NVG.
m.
Pull end of tubing to obtain a snug fit for the
NVG. Pull the two tie down straps tight.
Remove excess tubing over 1-inch in
length.
4.
Counter Balance Pocket.
a.
Cut a 4 1/2 x 9 3/4-inch length of O.D.
nylon duck cloth.
b.
Cut one each 4 1/2-inch length of 1inch pile
fastener tape (1), 1-inch hook fastener tape
(2), and 2-inch hook fastener tape (3).
c.
Fold o 1/4-inch hem on one end of the cloth;
place the 1-inch pile fastener tape (1) over
the fold and sew the tape to the cloth.
d.
Turn the cloth over.
Change 1 4-102
