SECTION IV. REMARKS
Figure B-1. Modified Screwdriver
(1)
(2)
REFERENCE CODE
REMARKS
A
See Figure B-1 for modified screwdriver
B
See Figure B-2 for wood block instructions
C
See Figure B-3 for CEP template
NOTE
File a notch in the blade about 1/8".
This will allow the screwdriver to
pass a screw that protrudes into the
slotted area of the screw post. The
screwdriver will fit in the slot of the
post even if the screw protrudes.
Slotted
screw post
with screw
protruding
Figure B-2. Wood Block
1" Wide Hook Fastener (Adhesive Back)
2" x 4" x 8"
1" Wide
Pile Fastener
(Adhesive
Back)
B-8
Change 3
TM 1-8415-216-12&P
