TM 1-1510-225-CL
N-6
BEFORE TAXIING.
*1. AC/DC power – Check.
*2. AVIONICS MASTER POWER – ON.
O * 3. EFIS POWER switches – ON.
*4. CABIN TEMP MODE and temperature switch –
Set as desired.
*5. BLEED AIR VALVES – As required.
*6. BRAKE DEICE – AS required.
*7. Avionics – Check and set as required.
O * 8. TCAS – TEST and set.
9. FLAPS – Check.
*10. Altimeters – Set and check.
*TAXIING
1. Brakes – Check.
2. Flight instruments – Check.
ENGINE RUNUP
1. Parking brake – As required.
2. Manual prop feathering – Check.
H 3. AUTOFEATHER/AUTO IGNITION – Check as
required.
H 4. Overspeed governors and rudder boost – Check
as required.
H 5. Primary governors – Check as required.
H 6. ICE VANES – Check.
7. CONDITION levers – HIGH IDLE.
8. POWER levers – IDLE.
