TM 1-1510-225-CL
N-4
*SECOND
ENGINE
START
(BATTERY
START)
1. First engine generator load – 50% or less– GEN
switch OFF.
2. Propeller area – Clear.
3. Engine – Start.
4. Engine and systems instruments – Check.
5. BATTERY CHG annunciator – Check.
6. INVERTER switch – ON, check INVERTER lights
OFF.
7. Second engine GEN switch – RESET, then ON.
8. CONDITION levers – As required.
9. RED ANTICOLLISION light – Reset.
ABORT START
1. CONDITION lever – FUEL CUTOFF.
2. IGNITION AND ENGINE START switch
–
STARTER ONLY.
3. ITT – Monitor for drop in temperature.
4. IGNITION AND ENGINE START switch – OFF.
ENGINE CLEARING
1. CONDITION lever – FUEL CUTOFF.
2. IGNITION AND ENGINE START switch – OFF
(1 minute minimum).
3. IGNITION AND ENGINE START switch
–
STARTER
ONLY
(15
seconds
minimum,
40 seconds maximum).
4. IGNITION AND ENGINE START switch – OFF.
